This tutorial will guide you through the setup process for the AudioPro C10 MKII WiiM Edition.
Setup Preparation
- Use the provided power cable to connect the AudioPro C10 MKII WiiM Edition to a power source. The speaker will automatically power on and enter Wi-Fi setup mode.
You can also press the Reset button on the back panel to initiate Wi-Fi setup mode if the device is not in this mode.
- Scan the following QR code to download and install the WiiM Home app on your mobile device.
Setup Guide
Follow these steps to set up the AudioPro C10 MKII WiiM Edition:
- Open the WiiM Home app on your mobile device.
- When the Set Up pop-up appears in the app, tap it to start the setup.
- Connect the AudioPro C10 MKII WiiM Edition to the same Wi-Fi network as the WiiM Home app.
- Check and update the firmware.
- Rename the AudioPro C10 MKII WiiM Edition.
- Enable Google Cast or add the device to Apple Home based on your preferences. .
Now, the AudioPro C10 MKII WiiM Edition is ready for use. Play music and enjoy seamless streaming of your favorite music and radio stations.
The AudioPro C10 MKII WiiM Edition can also be connected to an external device (e.g., an audio player) via the Line-In interface for audio input or a powered subwoofer via the Sub Out interface for enhanced bass performance.